Studies on the provisions of confining reinforcement for high-strength concrete column

Antonius

Abstract

It is general knowledge that the design of earthquake-resistant structures for high-strength concrete columns requires confiningreinforcement with a relatively high volumetric ratio to ensure the ductility of the structure. This implies that the mechanical behavior of high-strength concrete differs significantly from the behavior of normal-strength concrete. However, the provisions on the minimum volumetric ratio of confining-reinforcement contained in the Indonesian Concrete Code (SNI 2847-2013) is essentially derived from the test results for normal-strength concrete. This paper studies the confining-reinforcement provisions used in several standards, i.e., SNI 2847-2013, ACI-2011, NZS-2006 and CSA-2004, to determine the ductility of the concrete columns. The case study is based on the analysis of the cross-section of high-strength concrete columns, the parameters that affect the strength, and by evaluating the value of the column's cross -section curvature ductility. The study results showed that the equation for confining-reinforcement adopted in the SNI 2847-2013 is very conservative compared to other codes when applied to low axial load levels (?0.2) , but is relatively less conservative if the axial load level is greater than 0.3.

Journal
Procedia Engineering
Page Range
100-111
Publication date
2014
Total citations
Confinement effects on high-strength concrete columns subjected eccentric loading

Antonius

Confining reinforcement for concrete columns

Park R., Watson S., Zahn F.A.

Comparison study of requirement of confinement reinforcement for rectangular column in the several code and propose research

Imran I., Kristianto A.

No Title

No Title

NZS 3101.2006

No Title

ACI 318.2011

Performance of high-strength concrete columns confined by medium strength of spirals and hoops

Antonius, Antonius, Antonius, Antonius

Seismic performance of high strength concrete columns confined with high strength steel

Bayrak O., Sheikh S.A., Bayrak O., Sheikh S.A.

No Title

SNI 2847-2013, SNI 2847-2013

Design of confinement reinforcement for reinforced concrete columns

Subramanian N.

On the Confined High-strength Concrete and Need of Future Research

Antonius, Setiyawan P., Imran I.

Procedia Engineering

Evaluation on the Mechanical Properties of Steel-Fiber Concrete at Elevated Temperatures

Antonius, Setiyawan P., Purwanto

Iop Conference Series Materials Science and Engineering

On the analytical models of confined high-strength steel-fiber concrete

Sutarno, Sumirin A.

Civil Engineering and Architecture

Access to Document