Shear strength and deformation of steel fibre-reinforced concrete beams after fire

Karlinasari R., Antonius, Widhianto A., Purwanto

Abstract

In this study eleven beam of steel fibre-reinforced concrete were tested on concentrated load in order to evaluate the shear strength and deformation of the beams after burning. Variables considered in the test include spaces of shear reinforcement (stirrups) and temperature (normal temperature at 38°C, 300°C, 600°C and 900°C). The steel fiber used is set at 0.5% of the concrete volume. The phenomenon of the test results shows that although the beams were tested to achieve shear failure, the fact that all the tested beams did not encounter any shear failure. It has shown the influence of steel fibers and stirrups that plays a role in determining the mode of collapse. The concrete shear capacity of steel fibrous concrete beams installed with stirrups in altered spacing variations is not significantly different from each other, while beam deformability increases when the space stirrups are reduced. Furthermore, models of the developed-steel fibrous shear strength are compared and discussed with experimental results.

Journal
Advances in Concrete Construction
Page Range
105-111
Publication date
2020
Total citations
Replacing stirrups with steel fibers in high-strength concrete beams

Yang J.M., Yoo D.Y., Yoon Y.S., Yuan T.F.

Shear Strength of Prestressed Steel Fiber Concrete I-Beams

Dhonde H.B., Hsu T.T.C., Mo Y.L., Tadepalli P.R.

SHEAR STRENGTH OF STEEL FIBER REINFORCED CONCRETE BEAMS.

Sharma A.K.

Mechanical behaviour of steel fibre reinforced SCC after being exposed to fire

Katzer J., Kilijanek A., Kuzminska E., Ponikiewski T.

Behavior of steel fiber-reinforced high-strength concrete columns under uniaxial compression

Eid R., Langlois Y., Lvesque Y., Paultre P., Eid R., Langlois Y., Lvesque Y., Paultre P., Eid R., Langlois Y., Lvesque Y., Paultre P., Eid R., Langlois Y., Lvesque Y., Paultre P., Eid R., Langlois Y., Lvesque Y., Paultre P., Eid R., Langlois Y., Lvesque Y., Paultre P.

USE OF STEEL FIBERS AS SHEAR REINFORCEMENT.

Darwish I.Y.S., Narayanan R.

Behavior of steel fiber-reinforced concrete under reversed cyclic shear

Luo J.W., Vecchio F.J.

Shear Tests for Ultra-High Performance Fiber Reinforced Concrete (UHPFRC) Beams with Shear Reinforcement

Hong S.-G., Lim W.-Y.

Shear strength of steel fiber-reinforced concrete beams without stirrups

Eberhard M.O., Kim J., Kim W.-S., Kwak Y.-K.

Steel fibres as minimum shear reinforcement in reinforced concrete beams

Jain K., Singh B.

STRESS-STRAIN BEHAVIOR OF NORMAL AND HIGH-STRENGTH STEEL-FIBER CONCRETE POST BURNING

Antonius, Setiyawan P., Purwanto

International Journal of Geomate

The Shear Capacity Estimation of Reinforced Concrete Short Beams with Steel Fiber by Digital Image Correlation Approach

Iwanami M., Okubo K., Hemstapat N., Niwa J.

International Journal of Concrete Structures and Materials

Access to Document